R407c, Refrigerant 11 lbs., Leak Stop, PSXL4 Best R22 Replacement, Gauge Hoses

Gregoriou Brothers Refrigeration Since 1979Frosty-Freeze
R407c, Refrigerant 11 lbs., Leak Stop, PSXL4 Best R22 Replacement, Gauge Hoses
1) Model# 100, professional r404a Gauge/ Manifold with on/off valve and two 36" refrigeration charging hoses.
1) Part# 2100A1-5, Direct Injector, System Leak Sealer, Pro SealXL4;
One of our most requested products, Enviro-Safe® ProSeal Xl4 Inject with is a small, concentrated, easy inject refrigerant leak sealant. 
ProSeal XL4 Inject is compatible with all refrigerants except ammonia. 
This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units.
Enviro-Safe™ has been producing and packaging sealants for over 17 years.
This Sealant Injector hose was designed and tested during 2013/2014 and has been produced and marketed under private label since the fall of 2014.
Unlike most other products on the market, ProSeal XL4 Inject travels with the gas, which makes it faster, and more effective at finding leaks. 
ProSeal XL4 Inject will seal most leaks when used according to the manufacturer’s instructions and will seal most small holes located in the A/C condenser, evaporator, fittings, and metal line sets. 
Sealing leaks will save energy and lower refrigerant emissions.
Forms a hard seal on metal, schrader valves, o’rings, gaskets, a/c condensers, evaporators, line sets and solder joints
Even though Proseal XL4 can form a seal on the schrader valve, when you hook up to it the seal will release and allow you to use the schrader if necessary.
If there is still Proseal XL4 in the system it will reseal the schrader.
This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units.
Applications: heat pumps, split systems & mini split units, packaged units, and microchannel coils 
The tank is factory sealed in the new EPA & AHRI required color for ALL new tanks made as of 2020. (Gray)
The best replacement for R-22 Refrigerant is R-407c. 
It has a very low loss in capacity (0 – 5%) relative to R-22 and is less expensive than many other R-22 replacement refrigerants.
Applications:
Residential Air Conditiong Systems
Industrial Refrigeration Coolers Freezers
Industrial & Commercial Air Conditioning systems including Chillers. 
Our 11 Lb. Tank of Refrigerant R-407c comes in a  factory Sealed Cylinder.
Refrigearant R-407c is used as a replacement for R22 systems.
1) 11 lb. R-407c Factory Sealed Can.
The hose connection is standard, 1/4" male flare. R407C R407C is an HFC blend designed to have similar properties to R22 in air conditioning systems. R407C is suitable for residential & light air conditioning and direct expansion air conditioning systems. It is also used in medium temperature refrigeration systems.
The condition is new and the tank is factory sealed in the new, as of 2020, tank color which is gray.
Canada Customers;
Shipping to Canada is with UPS Ground only.
You will be required to pay your countries Import/Customs charges which is usually collected by UPS and has nothing to do with us the seller.
Please contact your local UPS Center to find out what those charges will be.
They are located in;
Edmonton, AB.
Concord, ON.
Delta, BC.
They will ask you what the item is (refrigerant) and the "cost" not including shipping.
Thank you!
You must be certified by the (EPA), Section 608 or Section 609 to purchase this item.
You must show proof of certification before paying and before the item is shipped. 
If you are purchasing this item for resale only to EPA Certified Technicians then please indicate so in a message and please keep accurate records of same.
Thank you. 
SHIPPING INFORMATION: We are a U.P.S. Certified Hazardous Material Shipper for both the United States and Canada.
The package will be properly labeled as a "Hazardous Materials Package" with all the required United States Department of Transportation identification labels as required in DOT-CFR Title 49 shipping regulations including "ORMD" Limited Quantities Exemption shipments.
1) Model# 100, professional r404a Gauge/ Manifold with on/off valve and two 36" refrigeration charging hoses. (1) Part# 2100A1-5, Direct Injector, System Leak Sealer, Pro SealXL4; One of our most requested products, Enviro-Safe® ProSeal Xl4 Inject with is a small, concentrated, easy inject refrigerant leak sealant. ProSeal XL4 Inject is compatible with all refrigerants except ammonia. This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units. Enviro-Safe™ has been producing and packaging sealants for over 17 years. This Sealant Injector hose was designed and tested during 2013/2014 and has been produced and marketed under private label since the fall of 2014. ---Unlike most other products on the market, ProSeal XL4 Inject travels with the gas, which makes it faster, and more effective at finding leaks. ---ProSeal XL4 Inject will seal most leaks when used according to the manufacturer’s instructions and will seal most small holes located in the A/C condenser, evaporator, fittings, and metal line sets. ---Sealing leaks will save energy and lower refrigerant emissions. ---Forms a hard seal on metal, schrader valves, o’rings, gaskets, a/c condensers, evaporators, line sets and solder joints ---Even though Proseal XL4 can form a seal on the schrader valve, when you hook up to it the seal will release and allow you to use the schrader if necessary. --- If there is still Proseal XL4 in the system it will reseal the schrader. ---This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units. ---Applications: heat pumps, split systems & mini split units, packaged units, and microchannel coils *The tank is factory sealed in the new EPA & AHRI required color for ALL new tanks made as of 2020. (Gray) The best replacement for R-22 Refrigerant is R-407c. It has a very low loss in capacity (0 – 5%) relative to R-22 and is less expensive than many other R-22 replacement refrigerants. Applications: Residential Air Conditiong Systems Industrial Refrigeration Coolers Freezers Industrial & Commercial Air Conditioning systems including Chillers. Our 11 Lb. Tank of Refrigerant R-407c comes in a factory Sealed Cylinder. Refrigearant R-407c is used as a replacement for R22 systems. (1) 11 lb. R-407c Factory Sealed Can. The hose connection is standard, 1/4" male flare. R407C R407C is an HFC blend designed to have similar properties to R22 in air conditioning systems. R407C is suitable for residential & light air conditioning and direct expansion air conditioning systems. It is also used in medium temperature refrigeration systems. The condition is new and the tank is factory sealed in the new, as of 2020, tank color which is gray. ** Canada Customers; Shipping to Canada is with UPS Ground only. You will be required to pay your countries Import/Customs charges which is usually collected by UPS and has nothing to do with us the seller. Please contact your local UPS Center to find out what those charges will be. They are located in; Edmonton, AB. Concord, ON. Delta, BC. *They will ask you what the item is (refrigerant) and the "cost" not including shipping. Thank you!Gregoriou Brothers Refrigeration Since 1979Frosty-Freeze
R407c, Refrigerant 11 lbs., Leak Stop, PSXL4 Best R22 Replacement, Gauge Hoses
1) Model# 100, professional r404a Gauge/ Manifold with on/off valve and two 36" refrigeration charging hoses.
1) Part# 2100A1-5, Direct Injector, System Leak Sealer, Pro SealXL4;
One of our most requested products, Enviro-Safe® ProSeal Xl4 Inject with is a small, concentrated, easy inject refrigerant leak sealant. 
ProSeal XL4 Inject is compatible with all refrigerants except ammonia. 
This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units.
Enviro-Safe™ has been producing and packaging sealants for over 17 years.
This Sealant Injector hose was designed and tested during 2013/2014 and has been produced and marketed under private label since the fall of 2014.
Unlike most other products on the market, ProSeal XL4 Inject travels with the gas, which makes it faster, and more effective at finding leaks. 
ProSeal XL4 Inject will seal most leaks when used according to the manufacturer’s instructions and will seal most small holes located in the A/C condenser, evaporator, fittings, and metal line sets. 
Sealing leaks will save energy and lower refrigerant emissions.
Forms a hard seal on metal, schrader valves, o’rings, gaskets, a/c condensers, evaporators, line sets and solder joints
Even though Proseal XL4 can form a seal on the schrader valve, when you hook up to it the seal will release and allow you to use the schrader if necessary.
If there is still Proseal XL4 in the system it will reseal the schrader.
This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units.
Applications: heat pumps, split systems & mini split units, packaged units, and microchannel coils 
The tank is factory sealed in the new EPA & AHRI required color for ALL new tanks made as of 2020. (Gray)
The best replacement for R-22 Refrigerant is R-407c. 
It has a very low loss in capacity (0 – 5%) relative to R-22 and is less expensive than many other R-22 replacement refrigerants.
Applications:
Residential Air Conditiong Systems
Industrial Refrigeration Coolers Freezers
Industrial & Commercial Air Conditioning systems including Chillers. 
Our 11 Lb. Tank of Refrigerant R-407c comes in a  factory Sealed Cylinder.
Refrigearant R-407c is used as a replacement for R22 systems.
1) 11 lb. R-407c Factory Sealed Can.
The hose connection is standard, 1/4" male flare. R407C R407C is an HFC blend designed to have similar properties to R22 in air conditioning systems. R407C is suitable for residential & light air conditioning and direct expansion air conditioning systems. It is also used in medium temperature refrigeration systems.
The condition is new and the tank is factory sealed in the new, as of 2020, tank color which is gray.
Canada Customers;
Shipping to Canada is with UPS Ground only.
You will be required to pay your countries Import/Customs charges which is usually collected by UPS and has nothing to do with us the seller.
Please contact your local UPS Center to find out what those charges will be.
They are located in;
Edmonton, AB.
Concord, ON.
Delta, BC.
They will ask you what the item is (refrigerant) and the "cost" not including shipping.
Thank you!
You must be certified by the (EPA), Section 608 or Section 609 to purchase this item.
You must show proof of certification before paying and before the item is shipped. 
If you are purchasing this item for resale only to EPA Certified Technicians then please indicate so in a message and please keep accurate records of same.
Thank you. 
SHIPPING INFORMATION: We are a U.P.S. Certified Hazardous Material Shipper for both the United States and Canada.
The package will be properly labeled as a "Hazardous Materials Package" with all the required United States Department of Transportation identification labels as required in DOT-CFR Title 49 shipping regulations including "ORMD" Limited Quantities Exemption shipments.
1) Model# 100, professional r404a Gauge/ Manifold with on/off valve and two 36" refrigeration charging hoses.
1) Part# 2100A1-5, Direct Injector, System Leak Sealer, Pro SealXL4;
One of our most requested products, Enviro-Safe® ProSeal Xl4 Inject with is a small, concentrated, easy inject refrigerant leak sealant. 
ProSeal XL4 Inject is compatible with all refrigerants except ammonia. 
This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units.
Enviro-Safe™ has been producing and packaging sealants for over 17 years.
This Sealant Injector hose was designed and tested during 2013/2014 and has been produced and marketed under private label since the fall of 2014.
Unlike most other products on the market, ProSeal XL4 Inject travels with the gas, which makes it faster, and more effective at finding leaks. 
ProSeal XL4 Inject will seal most leaks when used according to the manufacturer’s instructions and will seal most small holes located in the A/C condenser, evaporator, fittings, and metal line sets. 
Sealing leaks will save energy and lower refrigerant emissions.
Forms a hard seal on metal, schrader valves, o’rings, gaskets, a/c condensers, evaporators, line sets and solder joints
Even though Proseal XL4 can form a seal on the schrader valve, when you hook up to it the seal will release and allow you to use the schrader if necessary.
If there is still Proseal XL4 in the system it will reseal the schrader.
This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units.
Applications: heat pumps, split systems & mini split units, packaged units, and microchannel coils 
The tank is factory sealed in the new EPA & AHRI required color for ALL new tanks made as of 2020. (Gray)
The best replacement for R-22 Refrigerant is R-407c. 
It has a very low loss in capacity (0 – 5%) relative to R-22 and is less expensive than many other R-22 replacement refrigerants.
Applications:
Residential Air Conditiong Systems
Industrial Refrigeration Coolers Freezers
Industrial & Commercial Air Conditioning systems including Chillers. 
Our 11 Lb. Tank of Refrigerant R-407c comes in a  factory Sealed Cylinder.
Refrigearant R-407c is used as a replacement for R22 systems.
1) 11 lb. R-407c Factory Sealed Can.
The hose connection is standard, 1/4" male flare. R407C R407C is an HFC blend designed to have similar properties to R22 in air conditioning systems. R407C is suitable for residential & light air conditioning and direct expansion air conditioning systems. It is also used in medium temperature refrigeration systems.
The condition is new and the tank is factory sealed in the new, as of 2020, tank color which is gray.
Canada Customers;
Shipping to Canada is with UPS Ground only.
You will be required to pay your countries Import/Customs charges which is usually collected by UPS and has nothing to do with us the seller.
Please contact your local UPS Center to find out what those charges will be.
They are located in;
Edmonton, AB.
Concord, ON.
Delta, BC.
They will ask you what the item is (refrigerant) and the "cost" not including shipping.
Thank you!